BVV™ Pro Series Corrosion Resistant Two Stage Vacuum Pump
This is the BVV™ Brand Two Stage Pro Series vacuum pump. The BVV™ Pro Series will pull a vacuum down to 0.5 micron effortlessly. The pump is designed with corrosion resistance and long term continuous operation in mind. Adjustable gas ballast keeps moisture, solvent, and other contaminants from getting stuck in the pump. Compare to Cacejen or Xeno brand rotary vane vacuum pumps.
Specifications:
- Electrical Requirements: 115v 60Hz, 115v 60Hz and 220/380VAC 3 Phase (Note 35.3 CFM pump does not come with a plug and must be wired manually.)
- Pumping Rate: 14.1CFM, 21.2CFM and 35.3CFM
- Ultimate vacuum without gas ballast: 0.5 micron
- Inlet/Outlet connection: KF25/NW25 Flange
- Oil Volume: 2L/2.1 quarts, 2.3L/2.4 quarts and 4.5L/4.76 quarts
- Motor Rate: 1720 RPM
- Working Temperature: 5C to 40C
- Unit Weight: 38KG / 84lbs, 41KG / 90lbs and 68KG / 150lbs
- Recommended oil: Ultra grade 19
- CE Compliance: Yes
Pump Warranty Information
- Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™)
- If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
- These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
- When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
- To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.
(30 Day Limited Warranty: after this time period, any warranty issues must be resolved with the end supplier).
Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™)
If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min
