Air-Cooled 10HP Portable Chiller

Chiller features:

Compact micro-channel all aluminum air-cooled condensers for increased durability
High efficiency, low noise fans (air-cooled units only) with integral condensers for reduced operating noise and increased efficiency
Stainless steel brazed plate evaporators with flow and temperature safeties to guard against freezing
Low voltage 24 VDC control keeps the control circuit signals free from AC interference
C-UL 508A industrial control panel with single point electrical connection
Removable inlet air filter is easily cleaned and protects condenser coils to assume maximum efficiency

Controller features:

Password protected operational parameters
Start-to-start anti-cycle timer prevents short-cycling of compressor while minimizing unnecessary off periods
Display of compressor and pump running hours helps with scheduling routine maintenance
Loss of phase/phase reversal/phase imbalance alarm
Pump test button allows for quick and easy pump rotation check from the main control panel
Temperature deviation warnings provide an adjustable deviation set point to indicate abnormal operation of chiller or process equipment without shutting down the chiller

Specs	10HP - NQA1004E - 230V	10 HP - NQA1008D - 460V
Set Point Range:	6° to 26.6°C	-6° to 26.6°C
Temperature Stability:	±0.6°C	±0.6°C
Power Requirements:	230V, 3 phase, 60Hz, 37.7 A	460V, 3 phase, 60Hz, 18.7 A
Reservoir Capacity(gallons/liters):	22 gallons / 83 literswith Low Liquid Level alarm	22 gallons / 83 literswith Low Liquid Level alarm
Overall dimensions(L x W x H):	75 x 35 x 61”(190.5 x 89 x 155 cm)	75 x 35 x 61”(190.5 x 89 x 155 cm)
Pump type:	3HP stainless steel pump	3HP stainless steel pump
Maximum Pump Pressure:	30 psi	30 psi
Maximum Flow Rate:	27 gpm	27 gpm
Refrigerant type:	R410A	R410A
Process Connections:	1.5”	1.5”
Cooling Capacity:	38.7 kW / 132,000 BTU/hr @ 10°C	38.7 kW / 132,000 BTU/hr @ 10°C