BVV ELECTRONIC COLD TRAP
CT40 -40°F 300ml x 3 Cold Trap
The CT40 Electronic Cold Trap is used to condense vapors lost in vacuum applications before they reach the vacuum system. This prolongs the life of the vacuum system, reduces the need to change oil frequently, and efficiently traps vapors otherwise lost to evaporation such as terpenes. The CT40 model reaches a maximum temp of -40F under vacuum and contains three traps for maximum efficiency and condensation of vapors. Place in-line between your application and your vacuum system.
Specifications:
- Temp Range: -40F to Ambient
- Internal Dimensions: 180mm Internal Diameter x 210mm Depth (Holds about 1.4 gallons)
- External Dimensions: 465 x 560 x 710mm
- Weight: 94lbs
- Stainless Steel Interior
- 3x Pyrex Glass Traps
- 110V Power
- Please Note: This device is designed for operation on its own independent circuit breaker. For best results, do not use this device on a breaker shared with other equipment.
CT80 -112°F 300ml x 3 Cold Trap
The CT80 Electronic Cold Trap is used to condense vapors lost in vacuum applications before they reach the vacuum system. This prolongs the life of the vacuum system, reduces the need to change oil frequently, and efficiently traps vapors otherwise lost to evaporation such as terpenes. The CT80 model reaches a maximum temp of -112F under vacuum and contains three traps for maximum efficieny and condensation of vapors. Place in-line between application and your vacuum system.
Specifications:
- Temp Range: -112F to Ambient
- Internal Dimensions: 180mm Internal Diameter x 210mm Depth (Holds about 1.4 gallons)
- External Dimensions: 505 x 620 x 750mm
- Weight: 149lbs
- Stainelss Steel Interior
- 3x Pyrex Glass Traps
- 110V Power
- Please Note: This device is designed for operation on its own independent circuit breaker. For best results, do not use this device on a breaker shared with other equipment.
Customer MUST contact LeDAB within 3 days of delivery to file a claim and receive a replacement part.
In the event the customer DOES NOT contact LeDAB within 3 days of delivery the responsibility for replacement part(s) will fall on to the customer and the customer will have to pay for any replacement pieces.
LeDAB is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.
(30 Day Limited Warranty: after this time period, any warranty issues must be resolved with the end supplier).
