Distillation Head
Distillation Head has P2V4 (4 sets of Vigreux with 24/40 Joints), P5V6 (6 sets of vigreux in the distillation column with 34/45 lower joint and 24/40 upper and side joints) and P10V6 (6 sets of vigreux in the distillation column with 45/50 lower joint, 24/40 Thermometer Joint, and a 34/45 side joint) includes GL-14 barb connections.
- MADE IN THE USA
- Designed for P2V4 (1 & 2), P5V6 (5) and P10V6 (10) Liter Flasks
- P2V4 (Set of 4 Vigreux), P5V6 (Set of 6 vigreux) and P10V6 (Set of 6 vigreux) to allow for packing media
- Larger vacuum jacket allows for less heat loss during distillations
- Larger vapor path to allow for gas/vapor phase flow
- Increased internal diameter for faster, more efficient fractioning as well as packing and unpacking of media
- Increased condenser length and diameter for more efficient condensation of vapor with zero clogging
Notice to customers: All units are inspected for broken glassware or parts before leaving LeDAB. If the unit arrives damaged (this does not include minor imperfections or scuffs in glassware), the customer MUST contact LeDAB within 72 hours from carrier delivery to file a claim. If the customer DOES NOT contact LeDAB within 72 hours from carrier delivery, then LeDAB cannot issue any replacement(s) or compensation for the item; a new purchase will need to be made for a replacement.
Glassware Safety Disclaimer: LeDAB is not responsible for failure of glassware which must be inspected before and after every use because it may eventually develop imperfections or damage through normal usage, mishandling, and stress caused by temperature variations. If an imperfection or damage is noted while inspecting the glassware DO NOT use the glassware because it can fail causing bodily harm or damage to the surrounding area.
