Standard Pressure Clamps
(Tri-Clamp Single Hinge Clamp)
Best Value Vac recommends tightening all Standard Pressure Clamps (Non-High Pressure) to finger tight and then use either a screwdriver or wrench to tighten them 2 full turns. It is not recommended to over tighten the clamp and bottom it out as this will cause the gasket to be over-compressed and put too much tension on the clamp threads, which could cause it to fail.
Torque Specification Data Sheet
Specifications:
- Hinge Type: Double/Single
- Material: 304 Stainless Steel
- Connection Type: Tri-Clamp
Sizes | Maximum Pressure @70F (PSI) | Maximum Pressure @250F (PSI) |
1.5" | 500 | 250 |
2" | 450 | 250 |
3" | 350 | 150 |
4" | 200 | 125 |
6" | 150 | 75 |
1 Review Hide Reviews Show Reviews
-
CLAMPS
CLAMPS