Description
Our Ignition Resistant Axial fan with 30' of ducting provides the user with much-needed air circulation within a room to move flammable gases and any other air contaminants to an area with open air. This axial fan features superior design and durable construction, ensuring long-lasting capabilities with proper maintenance. Many of these gases are heavier than air so it is best to keep the fan ground level to provide the best room circulation possible.
The body is made of carbon steel and the impeller is made of aluminum. This combination provides a spark-free environment should the impeller make contact with the body.
Warning: Do not run the fan daisy-chained, it will cause disruption with air circulation and may cause the fan to back up air into the room.
***Note: Do not run fans daisy-chained it will cause disruption with air circulation and may cause the fan to back up air into the room.
| Specifications | |||
|---|---|---|---|
| Impeller Size: | 8" | 12" | 16" |
| Actual Size LxWxH: | 14x9x14 | 15x13x18 | 18x17x22 |
| Voltage: | 110v/60Hz (USA Plug) | ||
| RPM: | 2800 | 2800 | 3300 |
| Watts: | 180w | 500w | 1100w |
| Airflow CFM: | 880 | 2300 | 4200 |
| Noise: | 61(AdB) | 69dB(A) | 79dB(A) |
2 Reviews Hide Reviews Show Reviews
-
Good
Good
-
8" Explosion Proof Centrifugal Fan w/ Ducting
I bought this fan for my basement workshop for venting oil based finishes, epoxy, ca glue, alcohol based dyes ect. Using the ducting I can put it right at the source and exhaust it out the window instead of trying to clear the whole room. It works really well this way and gives me the flexibility to move the duct around and leave the fan in the window. Also these finishes are all very flammable and I don't have to worry about a fan sparking with a room full of flammable or toxic fumes. A good buy
