Contact Us

  • LeDAB
  • 1-888-493-2922
  • LeDAB 200 Boul Montpellier - B420 Montreal, QC, H4N 0H8, Canada Toll Free: 1-888-493-2922 Monday - Friday 10AM - 5PM EST


About us

Put something nice about your company here...

Skip to main content

Bvv Ignition-Resistant Centrifugal Fan w/ Ducting

CAD 295.95
(2 reviews) Write a Review
Adding to cart… The item has been added

 Explosion Proof Centrifugal Fan w/ Ducting 

This is the Best Value Vac Explosion Proof Axial fan with 30' of ducting. This fan provides the user with much needed air circulation within a room to move flammable gases and any other air contaminants to an area with open air. Many of these gases are heavier than air so it is best to keep the fan ground level to provide the best room circulation possible.

The body is made of carbon steel and the impeller is made of aluminum. This combination provides a spark-free environment should the impeller make contact with the body.


  • Impeller Size: 16"---- Actual Size: 17"w x 18"l x 22"h ---- Voltage: 110v/60Hz (USA Plug) ---- RPM: 3300 --- Watts: 1100w --- Airflow: 4,200 CFM (120m^3/min) ---- Noise: 79dB(A)
  • Impeller Size: 12"---- Actual Size: 13"w x 15"l x 18"h --- Voltage: 110v/60Hz (USA Plug) ---- RPM: 2800- Watts: 500w --- Airflow: 2,300 CFM (65 m^3/min) --- Noise: 69dB(A)
  • Impeller Size: 8"--- Actual Size: 9"w x 14"l x 14"h --- Voltage: 110v/60Hz (USA Plug) --- RPM: 2800- Watts: 180w --- Airflow: 880 CFM (25 m^3/min) ---- Noise: 61dB(A)

Fan Options:

  • Fan Only
  • Fan w/ Ducting
  • Ducting Only

Note: Do not run fans daisy chained it will cause disruption with air circulation and may cause the fan to back up air into the room (FAN ONLY OPTION DOES NOT INCLUDE DUCTING). 

(30 Day Limited Warranty: after this time period, any warranty issues must be resolved with the end supplier).

2 Reviews Hide Reviews Show Reviews

  • 5

    Posted by Peter on Apr 27th 2021


  • 4
    8" Explosion Proof Centrifugal Fan w/ Ducting

    Posted by Mike Brain on Oct 25th 2019

    I bought this fan for my basement workshop for venting oil based finishes, epoxy, ca glue, alcohol based dyes ect. Using the ducting I can put it right at the source and exhaust it out the window instead of trying to clear the whole room. It works really well this way and gives me the flexibility to move the duct around and leave the fan in the window. Also these finishes are all very flammable and I don't have to worry about a fan sparking with a room full of flammable or toxic fumes. A good buy